The wastewater collected in cesspools is transported to communal wastewater processing plants, and no nutrient load is placed on surrounding natural water systems. Quite often the toilet water is to be collected in a cesspool, because a major part of the nutrients (70-80 %) loading the environment originates from toilet waters. The cesspool is ideal for important ground water areas, and for other areas, where even the processed wastewater cannot be led into the soil.
Depending on the application, even a small cesspool can be sufficient. In some cases, however, it is essential to purchase a cesspool with the volume of several cubic metres. Wavin-Labko has a wide range of PE and GRP cesspools in different sizes. All the cesspools of Wavin-Labko are equipped with filling alarms that comply with the requirements.
Advantages of Wavin-Labko’s Cesspools:
• Cesspools are low (depending on the size, from lower edge of the inlet sewer to the bottom 1 m-1.57 m).
• Labko Cesspools have no restrictions on installation due to ground water level.
• The cesspools made of strong PE plastic have the emptying pipe in the middle of the tank. In addition to the ball-shape of the bottom, this allows the complete emptying of the tank.
• The maximum installation depth of the Labko Cesspools is one metre from the lower edge of the inlet sewer to the ground surface.
• The GRP Cesspool is also available with extra-reinforced wall. This is suitable in locations, where the sewer depth exceeds one metre – even up to the 80 000 litre volume.
Complete equipment set is delivered with each cesspool. This includes the LOKASET 20 filling alarm, the probe with 15 m cable, the anchoring belts, and the emptying pipe with the cap. The alarm device contributes to an easy way of controlling the filling of the cesspool. Labko LOKA 10000 Cesspool is delivered either with the emptying pipe (D 200) or with the maintenance shaft (D 600). The maintenance shaft has a plastic cover. Anchoring plates are available as an accessory.
